Ihr habt es bestimmt an der blinkenden LED bereits mitbekommen… FIBARO hat gestern das Stable Update auf die Firmware 4.550 veröffentlicht. Welche Neuerungen es gibt, haben wir uns von IntuITech kurzfristig angesehen.
Neben neuen Funktionen für das FIBARO Home Center hat FIBARO auch diverse Bugfixes veröffentlicht. Unserer Meinung nach liest sich die Liste nicht schlecht:
- -Implemented security fixes for backups.
- -Optimized and reduced amount of data processed when adding Z-Wave devices.
- Optimized and reduced amount of data processed when booting the system.
- Optimized communication between services to speed up the operation of the gateway.
- Added geofencing events to be used in scenes.
- Added possibility of setting radius around the point in localisation panel.
- Added notification recommending users to edit scenes based on location to ensure their proper operation in the next version of FIBARO Home Center app.
- Optimized response time of scenes setting brightness and colour of the LED ring for FIBARO Walli series.
- Optimized Z-Wave locks synchronization process by reducing maximum number of pin codes.
- Added possibility of assigning virtual devices to categories to be used in FIBARO Home Center app.
- Added possibility of hiding the virtual device.
- Added possibility of creating global variables with predefined values.
- Changed the time zones display format into more user-friendly.
- Added the button in General Configuration for resetting energy data.
- Home Center name is automatically set to serial number if empty and may be selected in block scenes.
- Added possibility of updating firmware of FIBARO Roller Shutter 2 (requires reconfiguration).
- Added support for FIBARO Roller Shutter 2 v26.26.
- Added support for FIBARO RGBW Controller v27.27.
- Added support for overriding the heating schedule for Danfoss Link Room Sensor.
- Added support for Heatit Z-TRM2fx.
- Added support for Qubino Smart Meter.
- Added support for Qubino 3-Phase Smart Meter.
Die behobenen Fehler findet Ihr hier:
- -The map in location configuration is not displayed correctly and the location cannot be set by entering coordinates.
- Gateway in DHCP mode does not automatically establish a connection in case of temporary network shortage.
- Parameters cannot be changed for devices without templates.
- Setting the decimal separator affects values after the decimal point for temperature sensors.
- List of backups does not load correctly.
- Specific configuration of sprinklers panel results in no connection with the gateway.
- Remote support does not work after losing and restoring the connection to remote access.
- FIBARO Walli devices do not properly support all actions available in scenes.
- Actions set in the configuration of FIBARO Walli devices are not hidden after changing the value of responsible parameter.
- The outputs state of the FIBARO Smart Implant changes automatically after rebooting the gateway.
- The inputs state of the FIBARO Smart Implant is always safe after rebooting the gateway.
- Leviton devices do not report the status correctly.
- CoolMasterNet Universal HVAC Bridge loses configuration after rebooting the gateway.
- Remote support is always enabled and does not turn off automatically after 7 days.
- Update is not downloaded in recovery mode after selecting option: repair system.
- Connected gateways lose the connection.
- Failed login attempts are counted incorrectly.
- Location is not updated when setting in the wizard.
- Scene code is not generated properly when setting two or more geofence events.
- Devices related to the CoolAutomation plugin are not added to the device list.
- Time of overriding the heating schedule for Danfoss thermostats is always set to 2 hours.
- Widgets are not available in mobile app.
- Users from China cannot set their location.
- Other minor fixes.
Solltet Ihr wie oben erwähnt FIBARO RGBW Module in eurem Z-Wave Netzwerk besitzen, dann erhalten diese nach der Installation zeitnah ein Firmware-Update. Dieses muss unter den erweiterten Einstellungen des Moduls manuell angestoßen werden. Beachtet bitte, dass dieses Update bis zu einer halben Stunde dauern kann. In dieser Zeit kann das Z-Wave Netzwerk sporadisch nicht mehr funktionieren. Dies hängt mit der Größe der übermittelten Daten zusammen.
Sofern Ihr FIBARO Roller Shutter 2 mit der Firmware-Version 25.25 im Einsatz haben, dann müssen diese neu konfiguriert werden und auch diese Version wird dann auf den neusten Stand (26.26) aktualisiert.
Wir wünschen euch eine fehlerfreie Installation des Updates und viel Spaß mit den neuen Funktionen.
Euer IntuITech-Team
Leider hat das Update meine 80+ Devices Konfiguration zerschossen und ich sehe zig unconfigured master devices 🙁 Wie es aussieht muss alle devices neu konfigurieren -Backup Restore und Resets haben leider nichts gebracht … 🙁
Hat jemand eine Idee wie ich das wieder ans Laufen bekomme?
Hi,
danke für deinen Kommentar und sorry, dass du mit der Version solche Probleme hast.
Am Besten wäre es, wenn du ein Restore mit einem alten BackUp, welches nicht von dem Update stammt, zurückspielst. Dies sollte eigentlich funktionieren.
Gruß
Daniel